Changing old lighting fixtures in any room can dramatically change its look. If you wish to add heat and sophistication to a particular room, try setting up ceiling pendants. This very simple house enhancement project can be done by any novice, and the last result will undoubtedly impress your visitors as ceiling pendant lights never ever cannot add design and elegance into any space.

Ceiling pendants are decorative and will add design into any interior décor, while at the very same time supplying adequate task lighting. They are perfect lighting fixtures over a bar top, cooking area island, dining table, or at the primary entrance of your house. When you are in front of the mirror, they might even be utilized as side lights for your restroom vanity to make sure that you have enough illumination.

Clean Pro

Depending on the design of the lighting component itself and the size of the space that you are lighting, a pendant light might be installed as a single component or in twos or 3s. Ceiling pendant lighting setup is rather easy as long as you have all the tools you need. In fact, this task can take just as much as an hour long following these 7 simple steps.

What You Will Need:

Pendant Lights

Junction Box

Drywall saw

Screw motorist

Ceiling Pendant Installation

Action 1: Turn off the main power.

Prior to you start with this job, switch off the main power at the breaker box. This is typically found in the garage or basement.

Step 2: Uninstall the old lighting fixture.

Eliminate the existing lighting fixture where you intend to install your ceiling pendant. Get rid of the bulbs then the light by unscrewing the hardware from the ceiling.

Step 3: Remove the old circuitry.

Detach all the wires of the existing light from the ceiling and remove the whole component.

Step 4: Insert the new junction box in the ceiling.

Set up a brand-new junction box into the area where you desire the brand-new pendant lighting to be mounted. Make sure that the hole is big enough for the junction box to fit in.

Step 5: Insert the new lighting component's circuitry into the junction box.

Pull all of the electrical wiring through the brand-new junction box. Use a mounting bracket to ensure that the pendant light will be firmly held on the ceiling and avoid any danger of falling. A mounting bracket is usually consisted of in many pendant light packages. Securely connect this to the junction box utilizing a combination of screws and bolts.

Step 6: Match the wires together.

Wire the brand-new ceiling pendant to the junction box and the installing bracket. Match the wires together-- green to green or copper, black to black, and white to white. Use a wire nut to attach each wire to its matching wire.

Step 7: Secure your brand-new ceiling pendant into the ceiling.

After all the wires have been connected to their corresponding matches, hide the wires by pushing them up into the junction box. Attach the canopy onto the mounting bracket using the screws or bolts and nuts which are normally consisted of in your pendant light set. Make sure that the lighting fixture is safely fastened prior to you turn the primary power back on at the breaker.

Enter your text here...